espanolEsta investigacion se fundamento en el analisis dela soldabilidad de las uniones de aluminio 5083H116 con material de aporte ER 5183, segunclasificacion de la AWS 5.10, mediante el procesoGMAW PULSADO, con el objeto de determinarlas condiciones de la zona afectada por el calorZAC en el material base, dependiendo del calorintroducido con diferentes equipos disponiblesen Colombia. Las variables consideradas dentrodel presente estudio fueron: posiciones desoldadura (horizontal), tipo de uniones (topey filete), parametros de los equipos (voltaje,amperaje, velocidad de alimentacion del aporte,velocidad avance), y gas de proteccion (Argon,Ar, 100%). Se utilizaron tecnicas de ensayos nodestructivos y destructivos para la caracterizacionde las discontinuidades encontradas, asi comolos criterios de aceptacion del codigo AWS D1.2(STRUCTURAL WELDING CODE - ALUMINUM)del AWS (AMERICAN WELDING SOCIETY).Como producto de la investigacion se obtuvieronlas condiciones para la aplicacion del material ER5183, sobre la aleacion de aluminio 5083 H116como material base soportados por los documentostecnicos como el WPS (WELDING PROCEDURESPECIFICATIONS) y PQR (Procedure QualificationRecord), que sustentan la soldadura de aluminio sinprecalentamiento, para su implementacion en elastillero de COTECMAR. EnglishThis research was based on the analysis of theweldability of aluminum joints 5083 H116, with fillerAWS 5.10 ER 5183 by GMAW PULSED process todetermine the conditions of the heat-affected zonein the base material, depending on the heat inputfor the process with different technologies availablein Colombia. The variables considered within thisstudy were: welding positions (horizontal), type ofwelded joints (butt and fillet), and parameters forwelding equipment (voltage, current, speed, powersupply, speed development), and protective gas used(Argon, 100%). Non-destructive and destructivetesting techniques were used to characterize thediscontinuities found and the criteria to acceptthe AWS D1.2 code (STRUCTURAL WELDINGCODE-ALUMINUM by the AMERICAN WELDINGSOCIETY). As a result, the investigation yielded theconditions for the application of filler material (ER5183) on base material (5083 H116), supportedby Welding Procedure Specifications Documents(WPS) and Procedure Qualification Record(PQR) to implement in aluminum welding at theCOTECMAR shipyard.