The design and simulation of a multifunctional system for the machining of mechanical parts and printing in 3D (x, y, z) using CAD software Solid works, was used to determine the static behavior of the system with the analysis of tension, deformation, displacement, safety factor, buckling, fatigue and frequency. For the above, it was determined that the lateral base supports a tension of 3.5x108Pa, causing a displacement of 25 mm and an equivalent unit strain (ESTRN) of 0.0012. And the base guiding a cumulative damage of 300% of deterioration that reduces its useful life to a range between 1x106and 1x1065utility cycles and a safety factor (F S) between 104.632 to 7869.86. On the other hand, the transverse base has a maximum cumulative damage percentage of4.10535 and a life cycle range ranging from 24358.5 to 1x106with a minimum SF of 5974