Abstract A Finite Element Analysis (FEA) was performed to evaluate the interaction between residual limb and socket when considering the dynamic loads of the gait cycle. Fourteen transfemoral amputees participated in this study, where their residual limbs ( i.e ., soft tissues and bone), and their sockets were reconstructed. The socket and the femur were defined as elastic materials, while the bulk soft tissues were defined as a hyperelastic material. Each model included the donning, standing, and gait cycle phase, with load and boundary conditions applied accordingly. The influence of adding the dynamic loads related to the gait cycle were compared against the modelling of the static load equivalent to the standing position resulting in changes of 23% ± 19% in the maximum values and in an increase in the size of the regions where they were located. Additionally, the possible correspondence between comfort and the location of peak loadbearing at the residual-limb/socket interface was explored. Consequently, the comfort perceived by the patient could be estimated based on the locations of the maximum stresses ( i.e ., if they coincide with the pressure tolerant or sensitive regions of the residual limb).