Abstract Surfactant-polymer (SP) flooding (also known as micellar flooding) is an enhanced oil recovery (EOR) process resulting from the interaction of three mechanisms: (1) oil solubilization, (2) interfacial tension reduction, and (3) aqueous-phase mobility reduction by polymer. Surfactant-polymer flooding has been studied both in the laboratory and field pilot tests for several decades. In SP flooding, traditionally a tapered polymer solution follows the injected surfactant slug. However, in recent years, co-injection of surfactant and a relatively high concentration of polymer solution has been used in several field trials. Despite a significant increase in oil recovery in several surfactant-polymer flood projects, the increased oil production period has been of short duration. The first objective of this paper is to present two field pilot tests which encountered productivity impairment, and the second objective is to describe the probable causes of the productivity impairment. The third objective of the paper is to present a methodology, using field and laboratory data, to anticipate the nature of long-term problems. To shed light on the issues, we will present two pilot tests located in the Illinois basin in the United States and San Francisco Field in Colombia. The results of the pilot tests and several laboratory experiments will be presented to address the productivity loss observed in the two pilot projects. Laboratory measurements to determine crude oil propensity for emulsions, with and without surfactants, are not part of the routine chemical EOR protocol in the industry. Nonetheless, understanding the cause and type of emulsion formation in crude oil, brine, and polymer at different salinities is critical and will be presented in the paper. In addition, in the paper, we will present the results of a numerical simulator to evaluate experimental laboratory results and the field test performance. In conclusion, because of the experience with numerous laboratory experiments and the conduct of associated field tests, we will be able to shed light on the complexity of surfactant-polymer EOR field applications.