Abstract Composites were made from 30% unsaturated polyester resin + 70% calcium bentonite and marble as aggregates, as well as 0.3 and 0.4 vol% of nylon fibers. The fiber‐containing polymer concretes (PCs) were subjected to 5, 10, 50, and 100 kGy applied radiation doses. The compressive strength values depend on both the fiber concentration and the irradiation dose applied. Moreover, the polyester‐based PCs containing two mineral aggregates, calcium carbonate and marble, have lower compressive strength values than those reported earlier for PCs containing only either silica sand or CaCO 3 . However, significant improvement of the compressive strain and the compression modulus of elasticity are achieved when nylon fibers are added. Both these properties go symbatically with the radiation dose. Mechanical characteristics can be related to the morphological features observed by scanning electron microscopy. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers